FDM – ULTEM 1010

Last updated: November 12, 2026

ULTEM 1010 is a high-performance polyetherimide (PEI) for FDM 3D printing from Stratasys. It has the highest heat resistance, strength, and stiffness of any of our FDM materials, with a heat deflection temperature above 210°C and a UL 94 V-0 flame rating. That makes it a strong choice for composite layup tooling, high-temperature fixtures, and demanding aerospace, automotive, and medical parts.


What ULTEM 1010 Is Best For

  • Composite layup tools and other high-temperature tooling
  • Jigs and fixtures that must hold up to heat
  • Aerospace and automotive parts that need heat and flame resistance
  • Autoclave-sterilizable medical tools and surgical guides
  • Electrical housings and insulators

When another material is a better fit

  • Need more toughness and flame, smoke, and toxicity ratings for aircraft interiors: ULTEM 9085
  • Need a lower-cost high-temperature carbon fiber material: PPA-CF
  • Need a biocompatible polycarbonate: PC-ISO

Key Material Facts

  • Heat deflection temperature: about 216°C (421°F) at 66 psi and 215°C (419°F) at 264 psi
  • Glass transition temperature: 209°C (409°F)
  • UL 94 V-0 flame rating (UL Blue Card, down to 1.0 mm wall thickness depending on build settings)
  • High stiffness: 3.0 GPa tensile modulus
  • Low outgassing per ASTM E595
  • Excellent chemical resistance and dielectric properties
  • Autoclave capable for sterilization and composite layup tooling

ULTEM 1010 Material Properties

Version note: we print ULTEM 1010 from Stratasys. Values below come from Stratasys’ June 2026 data sheet (printed on an F900, 0.010″ layers).

Mechanical properties (mean values from Stratasys’ published data sheet; XZ = on edge, along the layers; ZX = upright, across the layers)

PropertyXZZXMethod
Tensile strength at break79.2 MPa (11,500 psi)28.2 MPa (4,080 psi)ASTM D638
Tensile modulus3.04 GPa (441 ksi)3.00 GPa (435 ksi)ASTM D638
Elongation at break4.0%1.1%ASTM D638
Flexural strength128 MPa (18,600 psi) at 5% strain, no break81.6 MPa (11,800 psi)ASTM D790
Flexural modulus2.91 GPa (422 ksi)2.64 GPa (383 ksi)ASTM D790
Compressive yield strength245 MPa (35,600 psi)438 MPa (63,500 psi)ASTM D695
Notched Izod impact26.6 J/m (0.50 ft-lbf/in)21.7 J/m (0.41 ft-lbf/in)ASTM D256
Unnotched Izod impact260 J/m (4.87 ft-lbf/in)68 J/m (1.27 ft-lbf/in)ASTM D4812

Thermal and physical properties

PropertyValueMethod
Heat deflection temperature @ 66 psi216.9°C (422°F)ASTM D648
Heat deflection temperature @ 264 psi215.1°C (419°F)ASTM D648
Glass transition temperature209°C (409°F)ASTM D7426
CTE, −50 to 60°C (XY)36 µm/m·°C (20 µin/in·°F)ASTM E831
Thermal conductivity, 30°C0.24 W/m·KASTM E1952
Volume resistivity> 7 × 10¹⁴ ohm-cmASTM D257
Dielectric constant, 1 kHz2.84ASTM D150
Specific gravity1.29ASTM D792
Outgassing (flat): TML / CVCM0.55% / 0.02%ASTM E595

More information on ULTEM 1010 is available from Stratasys, the material manufacturer.


FDM parts are strongest along the layers and much weaker between them. ULTEM 1010 shows this clearly: Stratasys measures 79 MPa tensile strength along the layers (XZ) but only 28 MPa across them (ZX). We orient each part to put strength where it is needed. Our FDM Part Design Guide covers wall thickness, orientation, supports, and threaded inserts.

For composite layup and other high-temperature tooling, a honeycomb interior saves weight and material while keeping the tool surface stiff. We can help you design tooling for FDM.


Finish and Color Options

ULTEM 1010 parts are a natural tan color. We ship FDM parts with a strip and ship finish: we break away the supports and send the part with layer lines visible. Sanding, painting, heat-set threaded inserts, and other higher levels of finish are available on request and quoted per part. See all of our finishing and post-processing options.



If you like what you see...

You should sign up for our quarterly email newsletter! We send out a summary of all the latest testing videos, design guides, and anything else cool that has been added to the F3DP website 4 times a year.

We hate spam as much as you do so we only send all killer content and no filler BS!

facebook twitter instagram youtube