FDM – Firewire Flame Retardant ABS
Firewire FR ABS is a flame retardant ABS for FDM 3D printing from 3DXTECH. It is made from a UL 94 V-0 rated base resin, so parts self-extinguish once the flame is removed. It prints and performs much like standard ABS, which makes it a good choice for electrical housings, connectors, and other parts that need flame resistance without the cost of ULTEM.
What Firewire FR ABS Is Best For
- Electrical and electronic housings and enclosures
- Connectors, covers, and cable management parts
- Fixtures and jigs used near heat sources
- Automotive, aerospace, and industrial equipment parts that need flame retardance
- Prototypes of flame retardant molded parts
When another material is a better fit
- Need higher heat resistance and FAA flammability ratings: ULTEM 9085
- Need a flame retardant carbon fiber material: PPS-CF
- Need a flame retardant SLA resin with fine detail: Flame Retardant Resin
Key Material Facts
- Made with a UL 94 V-0 rated base resin (rated at 1.5 mm)
- Self-extinguishing: burning stops within 10 seconds of removing the flame, with no flaming drips (UL 94 V-0 criteria)
- Heat deflection temperature: 95°C (203°F) at 0.45 MPa
- Glass transition temperature: 105°C (221°F)
- Strength and stiffness similar to standard ABS
- Black only
Firewire FR ABS Material Properties
Version note: we print Firewire FR ABS from 3DXTECH, using 3DXTECH’s published data (TDS Rev 3.0) for the values below. The UL 94 rating applies to the base resin.
Typical properties (from 3DXTECH’s published data sheet; specimens printed flat (XY) at 0.25 mm layers and 100% infill)
| Property | Metric | English | Method |
|---|---|---|---|
| Tensile strength at break | 45 MPa | 6,500 psi | ISO 527 |
| Tensile modulus | 1,990 MPa | 289 ksi | ISO 527 |
| Elongation at break | 4% | 4% | ISO 527 |
| Flexural strength | 80 MPa | 11,600 psi | ISO 178 |
| Flexural modulus | 2,250 MPa | 326 ksi | ISO 178 |
| Heat deflection temperature @ 0.45 MPa (66 psi) | 95°C | 203°F | ISO 75 |
| Glass transition temperature | 105°C | 221°F | DSC |
| Density | 1.18 g/cm³ | 0.043 lb/in³ | ISO 1183 |
| Flammability (base resin) | V-0 at 1.5 mm | V-0 at 0.059 in | UL 94 |
More information on Firewire FR ABS is available from 3DXTECH, the material manufacturer.
A flame rating depends on wall thickness. The base resin is rated V-0 at 1.5 mm, so keep walls at least 1.5 mm (0.06″) thick where flame resistance matters, and confirm the rating of your finished part if your application requires certification.
FDM parts are strongest along the layers and weaker between them, so we orient each part to put strength where it is needed. Tell us how your part will be loaded when you request a quote. Our FDM Part Design Guide covers wall thickness, orientation, supports, and threaded inserts.
Finish and Color Options
Firewire FR ABS parts are black. We ship FDM parts with a strip and ship finish: we break away the supports and send the part with layer lines visible. Sanding, painting, heat-set threaded inserts, and other higher levels of finish are available on request and quoted per part. See all of our finishing and post-processing options.
Firewire FR ABS Part Gallery






Firewire FR ABS Material Testing Videos
Watch the full rocket testing video.
Related Resources
- FDM 3D printing overview
- FDM part design guide
- Accuracy of 3D printed parts
- Machine and material comparison
If you like what you see...
You should sign up for our quarterly email newsletter! We send out a summary of all the latest testing videos, design guides, and anything else cool that has been added to the F3DP website 4 times a year.
We hate spam as much as you do so we only send all killer content and no filler BS!