FDM – PLA 3D Printing Material

Last updated: November 13, 2026

PLA (polylactic acid) is the lowest-cost and easiest-to-print material for FDM 3D printing. It is stiff, holds fine detail, and barely warps, which makes it ideal for concept models, fit checks, and visual prototypes. It is not a good fit for parts that see impact, heat, or sunlight. We print PLA from 3DXTECH’s Economy PLA filament in a wide range of colors, including clear.


What PLA Is Best For

  • Concept models and mock-ups
  • Fit checks and assembly test parts
  • Visual aids, displays, and marketing prototypes
  • Light-duty brackets and spacers
  • Props, models, and hobby parts
  • Low-heat light covers (clear PLA)

When another material is a better fit

  • Need a tougher functional part: PETG
  • Need UV resistance for outdoor parts: ASA
  • Need a clear part you can see through: SLA Clear Resin

Key Material Facts

  • Lowest-cost FDM material we offer
  • Stiff: 2,865 MPa tensile modulus
  • Very low warping, good for thin walls and fine detail
  • Biobased, made from renewable resources such as corn starch and sugarcane
  • Softens around 55°C (131°F), so keep it out of hot cars and away from heat
  • Clear PLA lets light through but is frosted, like a milk jug, so it will not work for optical lenses

PLA Material Properties

Version note: we print PLA from 3DXTECH’s Economy PLA filament, using 3DXTECH’s published data (TDS Rev 1.0) for the values below.

Typical properties (from 3DXTECH’s published data sheet; specimens printed flat (XY) at 0.25 mm layers and 100% infill)

PropertyMetricEnglishMethod
Tensile strength at break56 MPa8,100 psiISO 527
Tensile modulus2,865 MPa416 ksiISO 527
Elongation at break8%8%ISO 527
Flexural strength115 MPa16,700 psiISO 178
Flexural modulus3,185 MPa462 ksiISO 178
Heat deflection temperature @ 0.45 MPa (66 psi)80°C176°FISO 75
Glass transition temperature55°C131°FDSC
Density1.24 g/cm³0.045 lb/in³ISO 1183
Surface resistance> 10¹³ ohm/sq> 10¹³ ohm/sqASTM D257

More information on PLA is available from 3DXTECH, the material manufacturer.


We print PLA on our FDM print farm, which limits single parts to 13.38″ × 12.59″ × 13.38″. For larger parts, we can run materials such as ABS or PC-ABS on our large-format FDM systems.

PLA is brittle compared to other FDM plastics, so avoid it for parts that take impacts or carry real loads. It is a great fit for thin-walled, visually complex models that need crisp detail.

FDM parts are strongest along the layers and weaker between them, so we orient each part to put strength where it is needed. Tell us how your part will be loaded when you request a quote. Our FDM Part Design Guide covers wall thickness, orientation, supports, and threaded inserts.


Finish and Color Options

We stock PLA in a range of colors, including clear. If we do not stock the color you need, we can usually get it in within 2–3 days. We ship FDM parts with a strip and ship finish: we break away the supports and send the part with layer lines visible. Sanding, painting, heat-set threaded inserts, and other higher levels of finish are available on request and quoted per part. See all of our finishing and post-processing options.



PLA Material Testing Videos

Watch the full rocket testing video.



PLA FAQ

What is PLA used for in 3D printing?

PLA is used for visual prototypes, concept models, fit checks, props, and hobby parts. It is ideal for parts that do not need high strength or heat resistance.

Is PLA strong enough for functional parts?

PLA is stiff, but it has low impact resistance and heat tolerance, so it suits light-duty parts. For functional parts, PETG, ASA, or Nylon 12 are better choices.

At what temperature does PLA start to deform?

PLA starts to soften around 55°C (131°F), so it is not a good fit for parts left in a hot car or mounted near heat sources.

How does PLA compare to ABS?

PLA is easier to print, cheaper, and holds dimensions better on large flat parts. ABS is tougher and handles more heat, so it is better for functional parts.

If you like what you see...

You should sign up for our quarterly email newsletter! We send out a summary of all the latest testing videos, design guides, and anything else cool that has been added to the F3DP website 4 times a year.

We hate spam as much as you do so we only send all killer content and no filler BS!

facebook twitter instagram youtube