FDM – ASA

Last updated: November 13, 2026

ASA (acrylonitrile styrene acrylate) is a UV-resistant, weatherable thermoplastic for FDM 3D printing. It has strength and heat resistance similar to ABS, but it does not yellow or turn brittle in sunlight, so it is our go-to material for parts that live outdoors. We print ASA from 3DXTECH’s 3DXMAX ASA filament, which has a low-gloss matte finish and comes in a wide range of colors.


What ASA Is Best For

  • Outdoor enclosures, covers, and signage
  • Automotive and powersports parts and prototypes
  • Sporting goods and recreational equipment
  • Durable functional prototypes and end-use parts
  • Parts that need a specific color without painting

When another material is a better fit


Key Material Facts

  • UV and weather resistant: does not yellow or turn brittle in sunlight like ABS
  • Heat deflection temperature: 95°C (203°F) at 0.45 MPa
  • Glass transition temperature: 105°C (221°F)
  • Good impact strength and chemical resistance
  • Low-gloss matte finish
  • Available in black, blue, brown, green, gray, orange, red, white, and yellow

ASA Material Properties

Version note: we print ASA from 3DXTECH’s 3DXMAX ASA filament, using 3DXTECH’s published data for the values below.

Typical properties (from 3DXTECH’s published data sheet)

PropertyMetricEnglishMethod
Tensile strength at break45 MPa6,500 psiISO 527
Tensile modulus2,010 MPa292 ksiISO 527
Elongation at break10%10%ISO 527
Flexural strength78 MPa11,300 psiISO 178
Flexural modulus2,000 MPa290 ksiISO 178
Heat deflection temperature @ 0.45 MPa (66 psi)95°C203°FISO 75
Glass transition temperature105°C221°FDSC
Density1.07 g/cm³0.039 lb/in³ISO 1183
Surface resistance> 10¹³ ohm/sq> 10¹³ ohm/sqASTM D257

More information on ASA is available from 3DXTECH, the material manufacturer.


FDM parts are strongest along the layers and weaker between them, so we orient each part to put strength where it is needed. Tell us how your part will be loaded when you request a quote. Our FDM Part Design Guide covers wall thickness, orientation, supports, and threaded inserts.


Finish and Color Options

ASA parts are printed in the color you choose, with a low-gloss matte surface. We ship FDM parts with a strip and ship finish: we break away the supports and send the part with layer lines visible. Sanding, painting, heat-set threaded inserts, and other higher levels of finish are available on request and quoted per part. See all of our finishing and post-processing options.



If you like what you see...

You should sign up for our quarterly email newsletter! We send out a summary of all the latest testing videos, design guides, and anything else cool that has been added to the F3DP website 4 times a year.

We hate spam as much as you do so we only send all killer content and no filler BS!

facebook twitter instagram youtube