DLP – LOCTITE IND249

Last updated: November 16, 2026

LOCTITE 3D IND249 is a black, high-temperature, high-strength resin for DLP 3D printing from Henkel. It is exceptionally stiff, holds its shape at temperatures above 110°C, and prints challenging geometries with fine feature resolution. It also has very high chemical resistance. Together, those properties make it a strong choice for mold tooling, manufacturing aids, and rigid parts that see heat or chemicals.


What LOCTITE IND249 Is Best For

  • Mold tooling for low-pressure molding and casting
  • Manufacturing aids, jigs, and fixtures that see heat or load
  • Production tooling with complex geometry
  • High-temperature functional prototypes
  • Rigid parts exposed to oils, fuels, and cleaning chemicals

When another material is a better fit


Key Material Facts

  • High stiffness: 2,980–3,350 MPa tensile modulus
  • High strength: 83–98 MPa (12,000–14,200 psi) tensile strength
  • Heat deflection temperature: 113–117°C (235–243°F) at 0.455 MPa
  • Very high chemical resistance: 2% or less mass change after 7 days in 14 industrial and automotive fluids
  • Fine feature resolution for complex geometry
  • Rigid, with 4–7% elongation at break, so not for snap fits

LOCTITE IND249 Material Properties

Version note: we print LOCTITE 3D IND249 from Henkel. Values below come from Henkel’s technical data sheet (version 2025/09/14), for fully post-processed parts.

Mechanical and thermal properties (from Henkel’s published data sheet; fully post-processed)

PropertyMetricEnglishMethod
Tensile strength at break83–98 MPa12,000–14,200 psiASTM D638
Tensile modulus2,980–3,350 MPa432–486 ksiASTM D638
Elongation at break4–7%4–7%ASTM D638
Flexural strength at break127–153 MPa18,400–22,200 psiASTM D790
Flexural modulus3,170–3,600 MPa460–522 ksiASTM D790
Notched Izod impact13–24 J/m0.24–0.45 ft-lbf/inASTM D256
Hardness81–88 Shore D81–88 Shore DASTM D2240
Heat deflection temperature @ 0.455 MPa113–117°C235–243°FASTM D648
Heat deflection temperature @ 1.82 MPa96–101°C205–214°FASTM D648
Water absorption (24 hr)0.5–0.7%0.5–0.7%ASTM D570
Density1.17–1.20 g/cm³0.042–0.043 lb/in³ASTM D792

Thermal and electrical properties

PropertyValueMethod
Coefficient of thermal expansion (−20 to 50°C)58–61 µm/m·KASTM E831
Thermal conductivity0.20–0.21 W/m·KASTM D5930
Dielectric strength24.0–26.4 kV/mmASTM D149
Dielectric constant, 1 kHz3.4–3.8ASTM D150
CytotoxicityCompliesISO 10993-5

Chemical resistance

Henkel soaked IND249 parts for 24 and 168 hours (ASTM D543) in DI water, isopropyl alcohol, acetone, 10% hydrochloric acid, 10% sodium hydroxide, 5% bleach, 5W-30 motor oil, xylene, brake fluid, transmission oil, hydraulic fluid, 30% hydrogen peroxide, 30% sulfuric acid, and a 50/50 coolant mix. Mass changed by 2% or less in every fluid after 7 days. See the data sheet for the full results, including mechanical properties after immersion.

More information on LOCTITE IND249 is available from Henkel (LOCTITE 3D), the material manufacturer.


IND249 is very stiff with low elongation, so design it like a rigid, glass-filled plastic. Avoid snap fits and thin cantilevered features, use metal inserts for fasteners that will be reused, and add fillets to inside corners to spread stress.

DLP builds parts in small to medium sizes, up to 13.9″ × 7.7″ × 13.8″ in one piece, at 0.1 mm (0.004″) layers. SLA and DLP are both resin processes, so our SLA Part Design Guide applies here too. It covers wall thickness, supports, hole and pin sizes, and how to get the most accurate resin parts.


Finish and Color Options

IND249 parts are black. We ship DLP parts with the supports removed. DLP parts come off the printer with a smooth surface, so they often need little more than that. Sanding, painting, Cerakote, and heat-set threaded inserts are available on request and quoted per part. See all of our finishing and post-processing options.



If you like what you see...

You should sign up for our quarterly email newsletter! We send out a summary of all the latest testing videos, design guides, and anything else cool that has been added to the F3DP website 4 times a year.

We hate spam as much as you do so we only send all killer content and no filler BS!

facebook twitter instagram youtube