3D Printed Rubber Part Comparison Guide

Last updated: November 16, 2026

In the world of Additive Manufacturing and 3D printing there are many options for those who need 3D printed rubber parts, but just like most things not all materials are made equal. For example:

The following is a break down of each of these materials, their physical properties, what they are commonly used for, and what uses should be avoided:


HP MJF Printed Rubber Parts:

The HP MJF process is extremely well suited for producing end use rubber parts in quantities that enable low volume / bridge production of parts at an economically viable cost. This allows for them to be considered against traditional manufacturing solutions for rubber part production like urethane casting or aluminum injection mold tools. Click here for more detailed information on M95A TPU Rubber.

Common end uses for HP MJF 3D Printed Rubber Parts:

  • Flexible parts like tubes, hoses, and ducts
  • Caster or small rim rubber wheels / tires
  • Grips for things like bikes, consumer products, and sporting goods
  • Custom shock absorbers and springs
  • Flexible lattice structures
  • All types of rubber or TPU automotive parts (material is strong enough to work on end use parts)
  • Shoe soles, orthopedic inserts, orthodontic applications
  • Specialized plugs and connectors for electrical / pneumatic applications
  • Custom gaskets, seals
  • Functional and design prototypes

Limitations of this material:

  • Limited to 95A material hardness
Mechanical PropertiesMeasurementTest method
Specific Gravity1.10 – 1.15ASTM D-792
Hardness (5 sec)Value in X: 90 Shore A
Value in Z: 90 Shore A
ASTM D-2240
Abrasion Volume LossValue in X: 100 (140) mm3
Value in Z: 100 (140) mm3
DIN-53516 / ISO-4649
Tensile StrengthValue in X: 17 (11) MPa
Value in Z: 8 (5) MPa
DIN-53504 / ISO-37
Elongation at BreakValue in X: 400 (180) %
Value in Z: 90 (30) %
DIN-53504 / ISO-37
Tear Strength (Die C)Value in X: 80 (80) KN/m
Value in Z: 35 (33) KN/m
ASTM D-624
Flexural ModulusValue in X: 85 MPa
Value in Z: N/A
ASTM D-790
Dimensional Accuracy in XY+/- 1.0 mmN/A

Thermal Properties

Thermal testing is still in the early phases, but this material can be heated to 392F (200C) for over 18 hours without melting (tensile strength will be reduced by 60% from a room temperature sample). When kept at or below 248F (120C) indefinitely there is a negligible effect to both tensile strength and elongation at break. Contact us for more detailed temperature effect data.

Click here for a downloadable version of this material data sheet.


SLA Printed Rubber & Silicone Parts:

SLA rubbers are good for prototyping and some limited end use applications. There are 2 material options for 3D printable rubbers on this type of machine Flexible 80A and Elastic 50A. Both of these materials can be considered for low volume end use applications in room temp indoor environments or select outdoor applications where the part will not see direct UV (Sun) light.

Click here for more detailed information on:

Common uses for SLA 3D Printed Rubber Parts:

  • Consumer goods prototyping
  • Soft touch features for robotics
  • Medical devices and anatomical models
  • Special effects props and models
  • Wearables, such as straps
  • Compressible buttons
  • Stretchable enclosures and casings
  • Soft tissue anatomy
  • Handles, grips, and overmolds
  • Cushioning, damping, and shock absorption
  • Seals, gaskets, and masks
  • Cartilage, tendon, and ligament anatomy

Limitations of this material:

  • Material is not UV stable and will discolor when overexposed for extended periods of time*
  • Printed bed for this SLA machine is small so parts can’t be that large
  • Not well suited for use for low volume manufacturing due to high cost

*Not true with Silicone 40A Resin

SLA – Flexible 80A Technical Specifications:

Mechanical PropertiesMetricImperialASTM Method
Ultimate Tensile Strength8.9 MPa1290 psiD412-06 (A)
Stress at 50% Elongation3.1 MPa433 psiD412-06 (A)
Stress at 100% Elongation6.3 MPa909 psiD412-06 (A)
Elongation at Break120%120%D412-06 (A)
Tear Strength24 kN/m137 lbf/inD624-00
Shore Hardness80 A80 AD2240
Compression Set (23 °C for 22 hours)3%3%D395-03 (B)
Compression Set (70 °C for 22 hours)5%5%D395-03 (B)
Click here for a downloadable version of this material data sheet.

SLA – Elastic 50 A Technical Specifications:

Mechanical PropertiesMetricImperialASTM Method
Ultimate Tensile Strength3.23 MPa468 psiD412-06 (A)
Stress at 50% Elongation0.94 MPa136 psiD412-06 (A)
Stress at 100% Elongation1.59 MPa231 psiD412-06 (A)
Elongation at Break160%160%D412-06 (A)
Tear Strength19.1 kN/m109 lbf/inD624-00
Shore Hardness50A50AD2240
Compression Set (23 °C for 22 hours)2%2%D395-03 (B)
Compression Set (70 °C for 22 hours)9%9%D395-03 (B)
Click here for a downloadable version of this material data sheet.

SLA – Silicone 40 A Resin Technical Specifications:

Mechanical PropertiesMetricImperial
Ultimate Tensile Strength5 MPa725 psiASTM D 412-06 (A)
Stress at 50% Elongation0.4 MPa58 psiASTM D 412-06 (A)
Stress at 100% Elongation1 MPa145 psiASTM D 412-06 (A)
Stress at 150% Elongation2.1 MPa305 psiASTM D 412-06 (A)
Elongation at Break230%230%ASTM D 412-06 (A)
Tear Strength12 kN/m68 lbf/inASTM D 624-00
Shore Hardness40A40AASTM 2240
Compression Set (23 °C for 22 hours)20%20%ASTM D 395-03 (B)
Bayshore Resilience34%34%ASTM D2632
Ross Flexing Fatigue at 23 °C500,000 cyclesASTM D1052, (notched),
60° bending, 100 cycles/minute
Ross Flexing Fatigue at -10 °C500,000 cyclesASTM D1052, (notched),
60° bending, 100 cycles/minute
Glass Transition Temperature-107 °C-161 °FASTM D4065
Click here for a downloadable version of this material data sheet.

DLP Printed Rubber Parts:

DLP rubbers are very durable and great for end use applications. The material we have available is LOCTITE IND5714

Common uses for DLP 3D Printed Rubber Parts:

  • Consumer products
  • Functional prototyping
  • Shoe Insoles
  • Lattice structures for sportswear
  • Production parts

Limitations of this material:

  • Printed bed for these machines are small so parts can’t be that large
  • Parts require support to be printed, this can cause postprocessing issues with very complex parts and add cost to finishing parts after printing.

DLP – LOCTITE IND5714 Technical Specifications:

Mechanical PropertiesMeasurement
Tear Strength8.4 – 9.4 kN/m
Young’s Modulus4.1 – 4.9 MPa
Elongation at Break191 – 195%
Energy Return55% – 63%
Shore A Hardness53 A
Stress at Break2.9 MPa
Click here for a downloadable version of this material data sheet.

PolyJet Printed Rubber Parts:

Agilus30 is a superior Rubber-like PolyJet photopolymer ideal for advanced design verification and rapid prototyping. One of the primary benefits over older generation Tango PolyJet materials is over 200% more flex before tearing. Agilus30 accurately simulates the look, feel, and function of Rubber-like products. It is available in harnesses ranging from Shore A values 30-95. Click here for more information on Agilus30.

Common prototype uses for Polyjet 3D Printed Rubber Parts:

  • Rubber surrounds and over molding
  • Parts that have living hinges
  • Wearables and footwear
  • Soft-touch coatings and nonslip surfaces
  • Knobs, grips, pulls, handles, gaskets, seals, and hoses
  • Exhibition and communication models
  • Simulates injection molded parts with both hard and soft components.

Limitations of this material:

  • Material is not UV stable and will discolor when overexposed for extended periods of time
  • Meant to be used only for prototype applications
  • Not well suited for use for low volume manufacturing due to high cost
  • This material can not be painted due to a chemical reaction that will harden the rubber
  • It is recommended not to expose Agilus30 to water for longer than one hour, as this will weaken the material and produce less than desired performance.
Mechanical PropertiesMetricImperialASTM Method
Tensile Strength2.4 – 3.1 MPa348 – 450 psiD-412
Elongation at Break220 – 270%220 – 270%D-412
Shore Hardness (A)30 – 35 Scale A30 – 35 Scale AD-2240
Tensile Tear Resistance4 – 7 Kg/cm22 – 39 lb/inD-624
Click here for a downloadable version of this material data sheet.

FDM 3D Printed Rubber Parts:

FDM TPU 92A Elastomer is a thermoplastic polyurethane material developed to enable the production of durable elastomer parts with additive manufacturing. It has a Shore A hardness of 92 durometer. This material enables prototyping of high functioning, durable, and complex parts. It is possible to produce large thermoplastic polyurethane parts with FDM TPU 92A Elastomer with good tear resistance, fatigue, memory, and recovery associated with elastomeric materials. Click here for more detailed information on TPU 95A Rubber.

Common prototype uses for FDM 3D Printed Rubber Parts:

  • Door trim & seals
  • Hoses & tubes
  • Airducts & bellows
  • Seals, gaskets, & grommets
  • Windshield & side glass trim
  • Console liners & cup holders
  • Body panel seals & gap hiders
  • Grips & surface protection covers
  • Parts requiring living hinges
  • Dust covers

Limitations of this material:

  • The parts are not air / vacuum tight
  • Parts can only be printed with 80% infill and can’t be printed solid or spare
  • Meant to be used only for prototype applications
  • Not well suited for use for low volume manufacturing due to high cost
  • Will swell up to 0.5% when exposed to wet / humid conditions
Mechanical PropertiesXY OrientationXZ OrientationASTM Method
Shore Hardness92 Shore A92 Shore AD2240
Tensile Strength16.8 MPa (2,432 psi)17.4 MPa (2,519 psi)D412
Elongation at Break552%482%D412
Tear Strength84.6 N/mm (483 lbF/in)N/AD624-C
Flexural Modulus25.6 MPa (3,719 psi)36.9 MPa (5,349 psi)D790
Heat Deflection (HDT) @ 66 psi38 ºC (100.4 ºF)38 ºC (100.4 ºF)D648
Click here for a downloadable version of this material data sheet.

SLS 3D Printed Rubber Parts:

After much experimentation we determined SLS 3D Printed Rubber parts to be totally inferior to the other options we offer that are listed above.

The major downsides we found were:

  • Low resolution / poor detail / bad accuracy.
  • Very limited build z height (parts tend to warp and twist in tall builds).
  • Parts are not air / vacuum tight.
  • Parts tend to break down / crack / flake apart when flexed.

For these reasons we no longer offer this option to our customers. If you are dead set on getting and SLS rubber part feel free to reach out to us and we would be happy to refer you to another service bureau who could help you out with this.


Click here to go to the 3D Printing Machines & Materials page


If you like what you see...

You should sign up for our quarterly email newsletter! We send out a summary of all the latest testing videos, design guides, and anything else cool that has been added to the F3DP website 4 times a year.

We hate spam as much as you do so we only send all killer content and no filler BS!

facebook twitter instagram youtube