High Detail. For demanding applications, our carefully-engineered resins
capture the finest features in your model.
Strong and Precise. These resins create accurate and robust parts, ideal for
rapid prototyping, functional testing and product development.
Smooth Surface Finish. Perfectly smooth right out of the printer, parts
printed on our stereolithography printers have the polish and
finish of a final product.
MATERIAL PROPERTIES DATA | |||
Metric | ENGLISH | METHOD | |
Tensile Properties | |||
Ultimate Tensile Strength | 65 MPa | 9380 psi | ASTM D638-14 |
Tensile Modulus | 2.8 GPa | 402 ksi | ASTM D638-14 |
Elongation at Break | 6% | 6% | ASTM D638-14 |
Flexural Properties | |||
Flexural Modulus | 2.2 GPa | 320 psi | ASTM D 790-15 |
Impact Properties | |||
Notched Izod | 25 J/m | 0.46 ft-lbf/in | ASTM D256-10 |
Thermal Properties | |||
Heat Deflection Temp. @ 1.8 MPa | 58 °C | 137 °F | ASTM D 648-16 |
Heat Deflection Temp. @ 0.45 MPa | 73 °C | 134 °F | ASTM D 648-16 |
SOLVENT COMPATIBILITY DATA | |
Percent weight gain over 24 hours for a printed and post-cured 1 x 1 x 1 cm cube immersed in respective solvent | |
Solvent | 24 hr weight gain, % |
Acetic Acid 5% | < 1 |
Acetone | Sample cracked |
Bleach ~5% NaOCl | < 1 |
Butyl Acetate | < 1 |
Diesel Fuel | < 1 |
Diethyl glycol Monomethyl Ether | 1.7 |
Hydraulic Oil | < 1 |
Hydrogen peroxide (3%) | < 1 |
Isooctane (aka gasoline | < 1 |
Isopropyl Alcohol | < 1 |
Mineral oil (Light) | < 1 |
Mineral oil (Heavy) | < 1 |
Salt Water (3.5% NaCl) | < 1 |
Skydrol 5 | 1 |
Sodium Hydroxide solution (0.025% PH 10) | < 1 |
Strong Acid (HCl conc) | Distorted |
Water | < 1 |
Xylene | < 1 |
DOWNLOAD THE FULL MATERIAL DATA SHEET
Clear – Level 1 Strip & Ship – Excess resin is cleaned off the parts and supports are removed. Support surfaces are not sanded and are left rough. Part is transparent but layer lines are visible and looking through the part will be blurry.
Clear – Level 1 Bead Blast– Support surfaces are sanded. Bead blast applied to entire part for uniform finish. Parts have a smoked appearance like a milk jug.
Clear – Level 2 Rough Coat– Rough support areas are sanded smooth and the part is clear coated, layer lines will be visible in the clear coat but you can easily see through the part and make out details on the other side.
Clear – Level 3 Optical Coat – Layer lines removed from the entire part by hand sanding, Part is then clear coated and its as close to being optically clear* as is possible.
About. Services. Contact. Industrial Codes.
Upload your files and fill out the information below to begin the quoting process.