Tough 2000 Resin is the strongest and stiffest material in our functional family of Tough and Durable Resins. Choose Tough 2000 Resin for prototyping strong and sturdy parts that should not bend easily. Strong and stiff prototypes. Sturdy jigs and fixtures. ABS-like strength and stiffness.
MATERIAL PROPERTIES DATA | |||
Metric | ENGLISH | METHOD | |
Tensile Properties | |||
Ultimate Tensile Strength | 46 MPa | 6671 psi | ASTM D 638-14 |
Tensile Modulus | 2.2 GPa | 329 ksi | ASTM D 638-14 |
Elongation at Break | 48 % | 48 % | ASTM D 638-14 |
Flexural Properties | |||
Flexural Modulus | 1.9 GPa | 275 ksi | ASTM D 790-15 |
Impact Properties | |||
Notched Izod | 40 J/m | 0.75 ft-lbf/in | ASTM D256-10 |
Thermal Properties | |||
Heat Deflection Temp. @ 1.8 MPa | 53 °C | 127 °F | ASTM D 648-16 |
Heat Deflection Temp. @ 0.45 MPa | 63 °C | 145 °F | ASTM D 648-16 |
SOLVENT COMPATIBILITY DATA | |
Percent weight gain over 24 hours for a printed and post-cured 1 x 1 x 1 cm cube immersed in respective solvent | |
Solvent | 24 hr weight gain, % |
Acetic Acid 5% | 0.71 |
Acetone | 18.82 |
Bleach ~5% NaOCl | 0.56 |
Butyl Acetate | 6.19 |
Diesel Fuel | 0.06 |
Diethyl glycol Monomethyl Ether | 5.32 |
Hydraulic Oil | 0.08 |
Hydrogen peroxide (3%) | 0.63 |
Isooctane (aka gasoline | 0.03 |
Isopropyl Alcohol | 3.7 |
Mineral oil (Light) | 0.13 |
Mineral oil (Heavy) | 0.17 |
Salt Water (3.5% NaCl) | 0.56 |
Skydrol 5 | 0.87 |
Sodium Hydroxide solution (0.025% PH 10) | 0.61 |
Strong Acid (HCl conc) | 3.01 |
Water | 0.61 |
Xylene | 4.1 |
DOWNLOAD THE FULL MATERIAL DATA SHEET
About. Services. Contact. Industrial Codes.
Upload your files and fill out the information below to begin the quoting process.